GEVA 300/4
EAN 4047526113681
ID 754431
Customs tariff number 87169090
ID 754431
Customs tariff number 87169090
Heavy duty hub fitting wheel, with elastic solid rubber tyre, with cast iron wheel centre
Tyre:
- high-quality elastic solid rubber in smooth rolling quality, steel-wire reinforced, hardness 65 Shore A
- very good operational comfort
- very good floor preservation, low-noise operation
- low rolling resistance
- colour black
- rugged grey cast iron
- centre piece with a central hole and fitting holes
- fitting holes with domed anchor recesses
- lacquered, colour anthracite
- fitted using domed anchor nuts and bolts in accordance with DIN 74361
- chemical resistance to many aggressive substances, except oils
- operating temperature: -30 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C
- wheel centre is approximately 4 mm wider than the specified wheel width
GEVA 300/4
EAN 4047526113681
ID 754431
Customs tariff number 87169090
ID 754431
Customs tariff number 87169090
Heavy duty hub fitting wheel, with elastic solid rubber tyre, with cast iron wheel centre
Tyre:
- high-quality elastic solid rubber in smooth rolling quality, steel-wire reinforced, hardness 65 Shore A
- very good operational comfort
- very good floor preservation, low-noise operation
- low rolling resistance
- colour black
- rugged grey cast iron
- centre piece with a central hole and fitting holes
- fitting holes with domed anchor recesses
- lacquered, colour anthracite
- fitted using domed anchor nuts and bolts in accordance with DIN 74361
- chemical resistance to many aggressive substances, except oils
- operating temperature: -30 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C
- wheel centre is approximately 4 mm wider than the specified wheel width
Rolling resistance
very good
Operating noise / floor surface preservation
very good
Tread and tyre hardness
65 Shore A
Wear resistance
satisfactory
-
Technical Data
-
CAD downloads
| Wheel Ø (D) | 300 mm | |
| Wheel width | 75 mm | |
| Load capacity at 4 km/h | 900 kg | |
| Load capacity at 6 km/h | 750 kg | |
| Load capacity at 10 km/h | 600 kg | |
| Load capacity at 16 km/h | 450 kg | |
| Load capacity (static) | 2,250 kg | |
| Bearing type | hub fitting | |
| Number of fixing holes | 4 | |
| Fixing hole Ø | 16.5 mm | |
| Central hole Ø (d) | 60 mm | |
| PCD (d1) | 100 mm | |
| Temperature resistance min | -30 °C | |
| Temperature resistance max | 80 °C | |
| Tread and tyre hardness | 65 Shore A | |
| Unit weight | 8 kg | |
| Non-marking | ||
| Non-staining | ||
| Antistatic | ||
| ESD | ||
| Electrically conductive | ||
| Corrosion-resistant | ||
| Heat-resistant | ||
| Tread hydrolysis-resistant | ||
| Suitable for autoclaves |
Please log in for download with your registered email address.